Switch CTS SWH-2126GSFP, L2, 24x10/100 port + 2xGB Combo SFP/TX, 12 V

Gigabitový L3 Switch SMC řady TigerSwitch 1000 s 12 SFP porty a 4x 10/100/1000 Gb RJ-45 Ethernet porty. Switch je určen jako centrální přepínač středních optických sítí pro ISP a FTTx aplikace. Switch podporuje VLANy, IGMP snooping, Port Mirroring. Switch má standardní výšku 1U.

Hlavní vlastnosti:
Gigabit Ethernet
Layer3
12 SFP portů
Switching capacity: 24 Gbps
Neblokující přepínání Full wire speed L2/L3 switching and forwarding GE
L3+ function: Static Routing, RIP, OSPF
Podpora IGMP
Výška 1U

Porty:
12x SFP portů pro SFP moduly
4x 10Base-T/100Base-TX/1000Base-T Auto-negotiation port, konektor RJ-45 STP
1x Sériový port pro management, Canon konektor

Propustnost:
24 Gbps switching fabric
Store-and-forward switching

Layer 2 Switching:
- Spanning Tree Protocol
- Forwarding mode with support to IEEE802.1w
- Store-and-forward
- Flow Control
- Full Duplex: IEEE802.3x
- Half Duplex: back pressure
- VLAN Support: Up to 256 groups; port-based or with 802.1Q VLAN tagging, GVRP for automatic VLAN learning, Private VLANs
- Private VLANs
- IEEE802.1v protocol based VLANs
- Class of Service
- Supports four levels of priority and weighted fair queuing
- DSCP based Class of Service
- TCP/UDP Port Based Class of Service
- Broadcast storm controlv - Link Aggregation
- Port Mirroring
- RADIUS Client Enhancement for 802.1x
- TACACS+ authentication client
- SSL
- SSH1.5 and 2 for secure Telnet Session
- Access Control List
- Rate Limiting
- Static Port Security
- SNTP (Simple Network Time Protocol)
- IEEE802.1s independent Spanning Tree for VLAN groups
- DiffServ
- RMON: Groups 1, 2, 3, 9 (Statistics, History, Alarm, Event)

Layer 3 Switching:
- IP routing: RIP routing, OSPF, Multinetting, Supernetting (CIDR)
- Multicast routing: DVMRP, IGMP, PIM
- Virtual Router Redundancy Protocol
- Address Resolution Protocol (ARP)

Management:
- In-band Management: Telnet, SLIP, Web-based HTTP, or SNMP manager
- Out-of-band Management: RS-232 DB-9 console port
- Software Loading: TFTP in-band or Xmodem out-of-band
- System Event

Napájení:
90 - 260 V AC, 47 - 63 Hz, maximální spotřeba 70 W
Redundant Power Unit Input: 12 V DC, 4,2 A

Pracovní podmínky:
Teplota: 0° až +50°C
Vlhkost: relativní vlhkost max. 5 - 95% (non-condensing)

Rozměry:
44 x 22,9 x 4,3 cm

Hmotnost:
5 kg